Shower and Bathtub Services in Greenville

Shower & Bathtub Installation & Repair in Greenville

A dripping tub, changing shower temperatures, or water pooling where it should not can signal a plumbing problem. The cause may be a worn valve, clogged drain, loose connection, or another component you cannot easily see. Some problems are straightforward repairs. Others can allow water to reach the floor, wall, or ceiling below.

CB Smith Plumbing has provided shower and bathtub plumbing services in Greenville, SC since 1982. Our licensed plumbers find the source of the problem and explain your options before work begins. If your shower or tub is leaking, draining slowly, or not working properly, we can determine what needs attention.

Common Shower Problems We Repair

Our shower plumbing services focus on the working components of the system. That includes valves, supply connections, drains, showerheads, and other plumbing fixtures. Tile, grout, and glass typically fall outside plumbing repair, but we can help determine whether the problem comes from the plumbing or the surrounding surface.

Greenville homes can have very different bathroom plumbing depending on their age and previous renovations. Older bathrooms may have cast iron tubs, exposed supply lines, or multi-handle valves. Newer and remodeled bathrooms commonly use fiberglass or acrylic units and single-handle valves. CB Smith Plumbing evaluates the existing setup before determining the appropriate repair.

Shower Valve Repair and Cartridge Replacement

The shower valve controls the mix of hot and cold water. When its internal components wear, the handle may become difficult to turn, feel loose, drip after shutoff, or stop controlling temperature properly.

Many single-handle valves use a replaceable cartridge. Because cartridges vary by manufacturer and model, identifying the existing valve is important before installing a replacement.

Older multi-handle valves may use stems, seats, and washers instead. Some can still be repaired with replacement parts. When compatible parts are unavailable or the valve itself is damaged, replacing the valve body may make more sense. CB Smith Plumbing explains the available options before recommending either approach.

Shower Faucet Repair for Drips and Leaks

A shower that continues dripping after it is turned off often has a worn cartridge, washer, seal, or another valve component. Replacing the showerhead will not solve a leak that originates inside the valve.

CB Smith Plumbing can identify the source, replace the appropriate components, and test the fixture after the repair.

Even a small drip can waste a surprising amount of water. According to the EPA, a showerhead dripping 10 times per minute can waste more than 500 gallons of water per year.

What Causes Shower Temperature Problems?

Sudden temperature changes can come from the shower valve, but the cause depends on whether the problem affects one fixture or the entire home. Pressure-balancing and thermostatic valves are designed to help control temperature changes during use.

A few patterns can help narrow down the source:

The shower suddenly becomes hotter or colder: The pressure-balancing or temperature-control components may need attention.
One shower never gets hot enough: The valve, cartridge, or temperature limit setting may be responsible.
Hot water is lukewarm throughout the house: The problem is more likely related to the water heater than the shower itself.

When several fixtures have the same hot water problem, the shower valve may not be the culprit. CB Smith Plumbing also provides water heater repair in Greenville to diagnose problems affecting hot water throughout the home.

Bathtub Plumbing Repairs in Greenville

Bathtub problems usually involve a few key plumbing components. The symptom often provides the first clue:

Water keeps running from the tub spout during a shower: Check the diverter.
The faucet drips after shutoff: A valve, cartridge, washer, or seal may be worn.
The tub drains slowly: Hair and soap buildup may be restricting the drain.
The tub will not hold water: The stopper or its internal linkage may need repair.
Water appears beneath or around the tub: Supply, drain, or overflow connections may be leaking.

CB Smith Plumbing can identify the source before recommending a repair.

Bathtub Faucets and Diverter Problems

In a tub-and-shower combination, the diverter redirects water from the tub spout to the showerhead. Some diverters are built into the spout, while others are part of the valve assembly.

When the diverter wears out, you may notice:

Water continuing to flow from the tub spout during a shower
Reduced water flow from the showerhead
A diverter that sticks or will not stay in position

Depending on the setup, CB Smith Plumbing can replace the diverter, tub spout, or affected valve components.

Clawfoot and Freestanding Tub Plumbing

Clawfoot and freestanding tubs often use exposed plumbing that differs from a standard alcove tub. Supply lines may rise from the floor or wall, while the drain and overflow can form a visible assembly.

Common trouble spots include:

Faucet and supply-line connections
Drain fittings beneath the tub
Overflow connections
Older or specialty fittings that need compatible replacement parts

Even with exposed plumbing, a slow leak can reach the flooring or subfloor below. CB Smith Plumbing repairs these assemblies and can help identify compatible parts when existing components wear out.

If you need shower or bathtub services, call (864) 574-4275 to schedule an appointment.

Bathtub and Shower Drain Repair

Hair, soap residue, and other debris can gradually restrict bathtub and shower drains. Some clogs collect near the stopper or drain opening. Others develop farther into the drain line.

If a tub or shower becomes slow again shortly after visible buildup is removed, the blockage may be deeper in the plumbing. CB Smith Plumbing provides drain cleaning when the problem extends beyond the fixture.

Tub Stoppers and Overflow Leaks

Not every bathtub drain problem is a clog. The symptoms can help distinguish between several common issues:

The tub will not hold water: The stopper or seal may be worn or misaligned.
The tub will not drain properly: The stopper mechanism or linkage may be interfering with flow.
Water appears below the tub only after a bath: The overflow assembly may be leaking.
A ceiling stain appears below an upstairs bathroom: A drain, overflow, or another tub connection may need inspection.

That last pattern can be especially useful. An overflow leak may only appear when bathwater rises high enough to reach the overflow opening.

What Causes Low Water Pressure in a Shower?

The first question is whether the pressure problem affects one shower or multiple fixtures.

If only one shower has weak pressure, possible causes include:

A clogged or restricted showerhead
A worn shower cartridge
A partially closed or restricted valve
Another problem isolated to the fixture

Low pressure throughout the house points toward a broader plumbing issue. Supply piping, valves, or the home’s incoming water pressure may need to be checked.

CB Smith Plumbing can determine whether the problem starts at the shower or elsewhere in the home’s plumbing system.

Hidden Leaks Around Showers and Bathtubs

Some of the most damaging shower and bathtub leaks develop where you cannot see them. Water can travel behind walls or beneath flooring before the source becomes obvious.

Warning signs can include:

Ceiling stains beneath an upstairs bathroom
Soft or spongy flooring near the tub or shower
Grout or surrounding surfaces that stay damp
Water appearing along baseboards or nearby walls
A persistent musty smell around the bathroom

These symptoms do not always identify the source. A valve, supply connection, drain, overflow assembly, or another plumbing component may be responsible.

Is the Shower Pan or Plumbing Leaking?

Water appearing around a tiled shower does not automatically mean the plumbing is leaking. The source may be a drain connection, supply line, shower valve, or the waterproofing beneath the tile.

Testing can help separate those possibilities before unnecessary areas are opened. If the source remains unclear, CB Smith Plumbing’s leak detection service can help locate where the water is coming from.

If testing indicates a problem with the shower pan or surrounding waterproofing rather than the plumbing, another trade may be needed for that portion of the repair.

Accessing Plumbing Behind a Shower Wall

A leaking or damaged shower valve sometimes requires access inside the wall. Depending on the bathroom layout, the plumbing may be reachable from an adjoining closet, hallway, or room rather than through the finished shower surface.

When an existing access panel is available, it can make diagnosis and plumbing repairs easier. CB Smith Plumbing evaluates the location of the valve and available access before determining the best approach.

If you need shower or bathtub services, call (864) 574-4275 to schedule an appointment.

Tub and Shower Plumbing Replacement

Not every fixture problem can be solved by replacing a cartridge or seal. Older or damaged plumbing components may eventually need replacement.

CB Smith Plumbing can replace plumbing components such as:

Shower valves and cartridges
Tub spouts and diverters
Showerheads and related connections
Tub and shower drains
Overflow assemblies
Accessible supply connections

Before replacing a component, we check how it connects to the existing plumbing and whether other worn or damaged parts could affect the repair. Once the work is complete, connections are tested for proper operation and leaks.

Water-Saving Showerhead Options

Replacing a showerhead can also be an opportunity to reduce water use. Standard showerheads are limited to 2.5 gallons per minute, while WaterSense-labeled models use no more than 2.0 gallons per minute.

The EPA estimates that an average family can save about 2,700 gallons of water per year by replacing showerheads with WaterSense-labeled models.

CB Smith Plumbing can install a replacement showerhead during a service visit when the existing fixture is worn, leaking, or ready for an upgrade.

Why Greenville Homeowners Choose CB Smith Plumbing

Shower and bathtub problems can involve several parts of the plumbing system. You want a plumber who identifies the actual source before recommending a repair. CB Smith Plumbing is family-owned and has served Greenville County since 1982.

All work is performed under South Carolina Master Plumber License #M116092.
Your technician is a CB Smith employee, not a subcontractor.
You receive a clear, itemized estimate before work begins.
Same-day appointments are often available for standard residential calls.
More than 280 Google reviews support a 4.9-star average.

If another bathroom fixture also needs attention, CB Smith Plumbing can provide additional plumbing services throughout your home.

Schedule Shower and Bathtub Repair in Greenville

A dripping faucet, slow drain, or hidden leak rarely improves on its own. Addressing the problem early can help limit wasted water and reduce the chance of damage around the fixture.

CB Smith Plumbing diagnoses shower and bathtub plumbing problems before recommending a repair. We explain what we find, review your options, and provide pricing before work begins.

If your shower or bathtub is leaking, draining slowly, or not working properly, request service from CB Smith Plumbing today.

If you need shower or bathtub services, call (864) 574-4275 to schedule an appointment.